Influence of the chemical structure of additives poly(ethylene-co-vinyl acetate)-based on the pour point of crude oils

One of the methods to prevent wax precipitation, during petroleum production, transport, and refining, is the use of polymer additives that can reduce the oil pour point. However, no single additive work for all types of crude oil and this relation is not yet well known. In this study, a family of polymers based on poly(ethylene-co-vinyl acetate), containing hydroxyl groups and long pendant hydrocarbon chains (from C6 to C18), were synthesized and characterized by H¹ nuclear magnetic resonance and solubility test. Four crude oil samples containing different amounts and size distribution of the wax were used. The additive's action is favored by higher contents of iso + cycloalkanes and lower contents of n-paraffins with larger chain sizes. The presence of the CH₃COO group in the copolymers promoted the lowering of the pour point, supported by a low OH concentration and the presence of a long pendant hydrocarbon chain: the best results were obtained with C10 and C12 chain lengths. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48969.     

Synthesis of Isopropyl Palmitate by Lipase Immobilized on a Magnetized Polymer Matrix

Penicillium camemberti lipase immobilized on a magnetized poly(styrene-co-divinylbenzene) was used as a biocatalyst for isopropyl palmitate synthesis. The reaction conditions were determined by 2² factorial central composite design. A mathematical model based on a simplified kinetic approach was developed to describe the system and validated with the experimental data. An assay carried out in a stirred-tank reactor confirmed the proposed model. The ester was purified and the properties such as density and water content were similar to those found in commercially available isopropyl palmitate.     

Effect of light,food additives and heat on the stability of sorghum 3-deoxyanthocyanins in model beverages

This work aimed to evaluate the stability of sorghum 3-deoxyanthocyanins (DXA) in model beverages (pH 3.5) elaborated with crude sorghum phenolic extract, containing ascorbic acid and sulphite, under fluorescent light exposure and subjected to heat treatment. There was no significant difference in the DXA degradation during storage under light exposure (24.16%) and absence of light (20.72%). DXA degradation did not differ in the presence of ascorbic acid during storage under light exposure (23.99–25.38%) and absence of light (19.87–21.74%). The addition of sulphite caused an initial bleaching reaction, but as a reversible reaction, the anthocyanin content was higher on the last day of storage compared to the first day. There were no significant differences in total anthocyanin content of all treatments subjected to the heat treatment (80 °C for 5 and 25 min). Thus, crude DXA are very stable under light, additives and heat, and may be useful as natural food colourants.     

Folding at the Microscale: Enabling Multifunctional 3D Origami‐Architected Metamaterials

Mechanical metamaterials inspired by the Japanese art of paper folding have gained considerable attention because of their potential to yield deployable and highly tunable assemblies. The inherent foldability of origami structures enlarges the material design space with remarkable properties such as auxeticity and high deformation recoverability and deployability, the latter being key in applications where spatial constraints are pivotal. This work integrates the results of the design, 3D direct laser writing fabrication, and in situ scanning electron microscopic mechanical characterization of microscale origami metamaterials, based on the multimodal assembly of Miura‐Ori tubes. The origami‐architected metamaterials, achieved by means of microfabrication, display remarkable mechanical properties: stiffness and Poisson’s ratio tunable anisotropy, large degree of shape recoverability, multistability, and even reversible auxeticity whereby the metamaterial switches Poisson’s ratio sign during deformation. The findings here reported underscore the scalable and multifunctional nature of origami designs, and pave the way toward harnessing the power of origami engineering at small scales.     

Biodegradation of PHBV/GNS nanocomposites by Penicillium funiculosum

Biodegradable polymer nanocomposites are an essential alternative to minimize the generation of polymeric solid waste that shows short shelf life and difficult degradation. In this study, nanocomposites based on poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) were prepared by the incorporation of different contents, 0.25, 0.50, 0.75, and 1.00 wt % of graphite nanosheets (GNS), using a solution casting method. The investigation of the PHBV samples biodegradation was made using filamentous fungi (Penicillium funiculosum) in solid medium. Characterization of the material was performed by weight loss, differential scanning calorimetry, carbonyl index determined by Fourier transformed infrared spectroscopy, contact angle, roughness, and scanning electron microscopy. Results revealed that PHBV/GNS nanocomposites can be totally degraded in the presence of Penicillium funiculosum; however, it will be necessary high incubation period. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44234.     

Direct ink writing of ceramic matrix composite structures

We present the development of an ink containing chopped fibers that is suitable for direct ink writing (DIW), enabling to obtain ceramic matrix composite (CMC) structures with complex shape. We take advantage of the unique formability opportunities provided by the use of a preceramic polymer as both polymeric binder and ceramic source. Inks suitable for the extrusion of fine filaments (<1 mm diameter) and containing a relatively high amount of fibers (>30 vol% for a nozzle diameter of 840 μm) were formulated. Despite some optimization of ink rheology still being needed, complex CMC structures with porosity of ~75% and compressive strength of ~4 MPa were successfully printed. The process is of particular interest for its ability to orient the fibers in the extrusion direction due to the shear stresses generated at the nozzle tip. This phenomenon was observed in the production of polymer matrix composites, but it is here employed for the first time for the production of ceramic matrix ones. The possibility to align high aspect ratio fillers using DIW opens the path to layer‐by‐layer design for optimizing the mechanical and microstructural properties within a printed object, and could potentially be extended to other types of fillers.     

Social organization,constraints and opportunities for kitchen garden implementation: ScalA and ScalA-FS assessment tools in Morogoro and Dodoma,Tanzania

Tanzania is the second largest country in East Africa with about 50 million inhabitants in 2014, and it is also considered as one of the poorest countries in the world. The country strongly depends on agriculture production. Like many other poor countries in sub-Saharan Africa, Tanzania sees food security as a central part of development and poverty reduction efforts. This work aims to investigate the opportunities and constraints of implementing a policy of “Kitchen Gardens” as a practice for two regions of Tanzania. The research was carried out with a qualitative approach through a first round of semi-structured interviews using a Scaling up Assessment Tool (ScalA), and a second round with a questionnaire survey, using a Scaling up Assessment Tool for Food Security (ScalA-FS) by Tanzanian and German experts from the Trans-SEC project. The experts assessed implementation suitability and the institutional requirements of Kitchen Garden across the food value chains in two Tanzanian regions with different climate regions, namely Dodoma (semi-arid) and Morogoro (sub-humid). Kitchen Garden assessments did not differ significantly between these regions. The ScalA tools provided a range of statements that allowed an overview of the structural situation to be obtained, which could enable Kitchen Garden activity to be incentivized and scaled up. However, a number of specific aspects, potentials, challenges, and likely bottlenecks of implementation related to their feasibility and institutional requirements, were indicated, which should be carefully monitored during implementation. Adopting the recommended strategies could help to close gaps in implementation, enhance community empowerment and social network development, reduce food insecurity and improve the health of the communities.     

Quantum junction solar cells

Colloidal quantum dot solids combine convenient solution-processing with quantum size effect tuning, offering avenues to high-efficiency multijunction cells based on a single materials synthesis and processing platform. The highest-performing colloidal quantum dot rectifying devices reported to date have relied on a junction between a quantum-tuned absorber and a bulk material (e.g., TiO(2)); however, quantum tuning of the absorber then requires complete redesign of the bulk acceptor, compromising the benefits of facile quantum tuning. Here we report rectifying junctions constructed entirely using inherently band-aligned quantum-tuned materials. Realizing these quantum junction diodes relied upon the creation of an n-type quantum dot solid having a clean bandgap. We combine stable, chemically compatible, high-performance n-type and p-type materials to create the first quantum junction solar cells. We present a family of photovoltaic devices having widely tuned bandgaps of 0.6-1.6 eV that excel where conventional quantum-to-bulk devices fail to perform. Devices having optimal single-junction bandgaps exhibit certified AM1.5 solar power conversion efficiencies of 5.4%. Control over doping in quantum solids, and the successful integration of these materials to form stable quantum junctions, offers a powerful new degree of freedom to colloidal quantum dot optoelectronics.